reply below

Posted

print

favorite this post Hawthorne NV - Low Voltage Tech (Hawthorne) hide this posting unhide

compensation: You bid

We need someone to complete ends and punch downs for PoE.

Building contractor will pull Cat 5 and Cat 6 and fish wire into box for completion. Each box will have 1) phone jack (cat 5 to switch), RJ 45 (cat 6 to switch), and RJ 6 connection with a face plate as shown in photo. Also, there will be one CAT 6 in ceiling for the PoE access point. Each room will have one jack for telephone (FCC Regulation), Ethernet connection (for plug in laptop), and Coax to RJ6 for television.

Utility Room: One 25 pair block for teleco; a 16 port PoE switch for access points; a 16 Port switch for wall RJ45 jacks.

Office Area will have one Access point (Cat 6) cable, one two port RJ45 jack; one dual RJ11 jack. Ceiling in managers office area will have one Cat6 connection.

This project calls for a low voltage tech to configure end connections for teleco, RJ4, and coax at both ends. There would be 50

A dozen rooms with CAT 6 pulled to center of ceiling. Units will be gutted, and the option to run cabling will be while ceiling gutted. This is the information gathering stage, and the bid will be for time and materials only, and most materials will be provided by the facility.

The general manager is a former IBM network engineer, so all design and equipment will be in place before the project begins. It could be six months before this project is implemented. Currently, we are in the architectural review stage. This will be a one day project for installation of ends, toning, and testing.

resumes to

show contact info .

You bid on consideration
  • do NOT contact me with unsolicited services or offers

post id: 6451793604

posted:

updated:

best of [?]


No contact info? if the poster didn't include a phone number, email, or
other contact info, craigslist can notify them via email.